Checking Components
Check that the fuel level in the tank is not too low (almost no fuel).
Check the connectors between the fuel pump (FP) control module and the fuel pump (FP). Check for contact resistance. Check for oxidation.
Check the fuel lines and fuel filter for blockage and leaks.
Remedy as necessary.
Try a new fuel pump (FP) if no fault is found during the above fault-tracing.
HINT: The diagnostic trouble code (DTC) can also be caused by a defective fuel pump (FP) control module.
Other information
- see FUEL PUMP AND LEVEL SENSOR UNIT
- see FUEL PUMP DRIVER MODULE (2007)
- see CHECKING WIRING AND TERMINALS
- Continue
Refer to VERIFICATION