Identifying The Damper Motor Module (DMM), Continued.

HINT: Identification of damper motors requires that the relevant damper motor is run to the limit positions. These runs can take up to 30 seconds. It is important that a battery charger is connected when identifying the damper motors. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

• Ignition off.
• Reinstall the connectors, components etc.

  Carry out identification as follows: 

  • Ignition on.
  • Click on the VCT2000 symbol in VIDA (Volvo scan tool). Wait until identification has been carried out.
  • Ignition off.
  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to CALIBRATING THE CLIMATE CONTROL MODULE (CCM)