Verification, Continued

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Checking Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.
  NOTE:

  It is important that only the ignition is on in order for the heater to start.

• Activate the heater.

  On activation of the heater sequence, the heater starts up and operates for approximately 2 min 30 s. A buzzing sound must be heard from the heater.

  Do not interrupt the heater sequence. The heater is switched off automatically after approximately 2 min 30 s.

  When the heater sequence is completed the read out of whether or not flames were detected can be made.

  Other information 

  • see DESCRIPTION OF PARAMETERS
  • see DESCRIPTION OF ACTIVATIONS
  • see FUEL-POWERED PREHEATER, CHECKING
  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the heater working? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION