Over Heated: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Checking Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Activate the heater.

  On activation of the heater sequence, the heater starts up and operates for approximately 2 min 30 s.

  Do not interrupt the heater sequence. The heater is switched off automatically after approximately 2 min 30 s.

  When the heater sequence is completed the read out of whether or not flames were detected can be made.

  Check that the heater starts and is working correctly.

  Other information 

  • see FUEL-POWERED PREHEATER, CHECKING
  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the function OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION