Connecting the Breakout Box

Special tools: 

9511428

9511499

9511507

9813194

• Ignition off.
• Remove the door panel
• Disconnect the module connectors.
  NOTE: Unplug the 12-pin connector before the 30-pin connector.

Connect the adapter to the control module's connector. Connect breakout box 9511428 and cable harness 9511499 to the adapter.

Adapter cable harness 9511507 is for the 12-pin connector, and adapter cable harness 9813194 is for the 30-pin connector.

Disconnection of breakout box in reverse order.

Other information 

• To remove the door panel, see Replacing the Front Door Side Panel
• For further information about signals and other values, see Signal Specification .