Diagnostic trouble code information

Condition

Fig 1: Identifying Control Module For Steering Wheel Angle Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

This diagnostic trouble code applies only to ABS systems equipped with DSTC.

The steering wheel angle sensor (SAS) control unit transmits a signal on the CAN network. The ABS control unit receives the signal and compares it with the signal of the yaw-velocity sensor. If the ABS control unit registers that the signal from the steering wheel angle sensor is unreasonable, diagnostic trouble code ABS-00B3 is set.

Substitute Value

Anti-spin function blocked.
Stabilizing function blocked.

Possible Source

Incorrect fore carriage adjustment.
Incorrectly fitted steering wheel angle sensor.

Fault symptom[s]

Anti-spin does not work.
Stabilizing function not working.
Anti-spin warning lamp is on.