Checking diagnostic trouble codes (DTCs): Information

HINT: Diagnostic trouble code (DTC) BCM-0148 can be stored when programming the brake control module. If this is the case, erase the diagnostic trouble code (DTC). 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on
• Erase the diagnostic trouble code (DTC) if it was stored during programming.
  Fig 2: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the diagnostic trouble code (DTC) stored when programming the brake control module? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking diagnostic trouble codes (DTCs) in the central electronic module