Checking STC/TRACS control module: Verification: Verification
HINT: After carrying out the repair check that the fault has been remedied.
- Ignition off.
- Reconnect connectors, reinstall components.
- Ignition on.
When the ignition is switched on the control module lights the anti-spin warning lamp (the TRACS warning lamp lights in TRACS systems). This goes out after approximately 2 seconds.
NOTE:The warning lamp will not go out if a fault has been stored in the control module.
Press the anti-spin switch on cars equipped with STC (TRACS switch on cars equipped with TRACS). Hold the switch down and check that the anti-spin warning lamp lights (TRACS warning lamp on cars equipped with TRACS).
Does the warning lamp go out after 2 seconds?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to Information