Checking the cable
- Ignition off
- Disconnect the connector from the central electronic module (HEM)
- Disconnect connector (9/13) from the front right seat heater.
Check the signal cable between central electronic module (HEM) terminal #4C and front right seat heater (9/13) connector terminal #2. Check for a short-circuit to ground. Check for an open-circuit.
Remedy as necessary.
Other information:
- For information about the central electronic module (HEM) connector, see Central electronic module (HEM), replacing
- To connect the breakout box, see Connecting the breakout box
- For information about signals, see Signal specification
- See Checking wiring and terminals .
Is the cable OK?
- YES
Refer to Verification
- NO