Checking Relay Supply

Remove the locking relay (2/113).

Measure the voltage between 5 in the relay socket and ground.

The voltmeter should display battery voltage.

HINT: If the value is OK but the fault still remains, connect the contacts to the lock module and link between 3 and 5 in the relay socket to force-feed the lock motor while continuing to test. 

Additional information 

• To access relay/fuse box in the boot, see Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing .

Fig 1: Identifying Voltmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Relays

Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the voltmeter show the battery voltage? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking Fuse 11D/8