Diagnostic Trouble Code Information
Condition
If the control unit detects a low signal on the ICK wire between central electronic module (CEM) 14D and antenna unit 2 when the signal should be high or no signal, diagnostic trouble code CEM-6C42 is displayed.
Substitute Value
Nothing.
Possible Source
- Wire between central electronic module (CEM) 14D and antenna unit 2 short circuited to ground
- Open circuit on wire between central electronic module (CEM) 14D and antenna unit 2
- Open circuit on +15 supply.
Fault symptom[s]
- The engine will not start. (The starter motor does not work).