Diagnostic Trouble Code (DTC) Information CEM-6C44
Condition
The central electronic module (CEM) communicates with the ignition key when the key is inserted in the ignition switch.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers an open-circuit in the data cable for the ignition switch, a short-circuit to ground in the cable or that there is no communication.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.
Substitute Value
- None.
Possible Source
- Fault in the power supply to the ignition switch
- Short-circuit to ground in the data cable
- Open-circuit in the data cable.
Fault symptom[s]
- The starter motor does not turn.