Checking / Replacing Relay 2/116

Remove relay 2/116. Check the relay base switches for contact resistance and oxidation according to Contact resistance and oxidation .

Install the relay.

Activate the relay using the left rear door control panel, window up.

If the function is now OK the fault was caused by a contact fault in the relay base.

Other information 

• See Central electronic module (CEM), replacing

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Relays

Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the function OK? 

• YES 

  Refer to Verification 

• NO 

  Refer to Replacing Relay 2/116