Checking the Wiring
- Ignition off.
If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can be caused by interference at start up or can be a different type of fault which occurs on different occasions. The fault is evaluated depending on how it occurs.
Check the cable between the central electronic module (CEM) and the switch for the hazard warning signal flasher. Check for an open-circuit.
Take readings between:
- Central electronic module (CEM) terminal #D14 (14) and terminal #1 on the switch for the hazard warning signal flasher.
Remedy as necessary.
Other information
- Continue
Refer to Verification