Signal Too Low: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Adjust the beam length between maximum and minimum.

  Check that the beam length changes.

Does the beam length change? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information