Checking the Cable

Check fuse 11B/10.

Check the cable between fuse 11B/10 and relay base #1. Check for an open-circuit.

Check the cable between central electronic module (CEM) terminal #17A and relay base 2/93 terminal #2. Check for an open-circuit.

Also check the connector. Check for an open-circuit.

Remedy as necessary.

Other information: 

• To connect the breakout box, see Connecting the Breakout Box
• For information about signals, see Signal Specification
• See Checking Wiring And Terminals

Fig 2: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Identifying Relay Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Verification