Signal Too Low Or Signal Missing: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Activate high-pressure cleaning by activating the windshield washer.
HINT: The washer must be activated for more than 0.3 seconds before high pressure cleaning will be activated. High-pressure cleaning is activated every fifth time the washers are activated if not more than 10 minutes have passed since the last activation.
Is the washer working?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to Information