Checking components and wiring

Check the cable between rear electronic module terminal #D2(terminal #B02) and "15I supply" relay 2/52 terminal #2. Check for a short-circuit to supply voltage.

Check the relay terminal, in particular relay guide 2/52 terminal #2, for a short-circuit to supply voltage.

Remedy as necessary.

Try a new relay if no faults are found.

Other information: 

• To connect the breakout box, see Connecting the breakout box
• For information about signals, see Signal specification
• When the relay is installed and activated, the voltage at the relay guide must be 0 V
• See Checking wiring and terminals .

Fig 1: Identifying Voltage Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Relays And Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification