Checking wiring and connectors
Check the cables between fuel level sensor connector terminal #5 and breakout box terminal #A02 (#A2). Check for an intermittent short-circuit to ground. Check for an intermittent open-circuit.
Check the ground lead between breakout box terminal #A10 (#A10) and fuel level sensor connector terminal #6. Check for an intermittent open-circuit.
Other information:
- For further information about signals and other values, see Signal specification
- To connect the breakout box, see Connecting the breakout box
- To access the control module, see Integrated relay/fuse box cargo compartment/rear electronic module, replacing
- To access the fuel level sensor, see Left fuel gauge sensor
- See Checking wiring and terminals. Intermittent faults .
- Continue
Refer to Information