Checking cable and component
NOTE:
Only fault-trace the circuit of the door displaying the faulty value.
Left front door
Check the signal cable between rear electronic module (REM) connector terminal #52 (#C12) and terminal #3 on the lock mechanism connector. Check for a short-circuit to supply voltage. Check for an open-circuit.
Right front door
Check the signal cable between rear electronic module (REM) connector terminal #29 (#D29) and terminal #3 on the lock mechanism connector. Check for a short-circuit to supply voltage. Check for an open-circuit.
Remedy as necessary.
Other information
- See Connecting the breakout box
- See Signal specification
- See Lock mechanism front side door, replacing
- Disconnecting the rear electronic module (REM): Rear electronic module (REM), replacing
- See Contents
- Continue
Refer to Verification