Checking cable and component

Check the power supply cable between rear electronic module (REM) connector terminal #31 (#D31) and tilt sensor connector terminal #1. Check for a short-circuit to supply voltage.

Remedy as necessary.

Other information 

• See Connecting the breakout box
• See Signal specification
• Disconnecting the rear electronic module (REM): Rear electronic module (REM), replacing
• See Contents

Fig 1: Identifying Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Inclination Sensor Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification