Checking the component

Remove the relay 2/67 (2/87 5DRS). Check the relay base switches. Check for contact resistance and oxidation.

Install the relay.

Activate the relay.

If the function is now OK the fault was caused by a contact fault in the relay base.

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Relays

Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the function OK? 

• YES 

  Refer to Verification 

• NO 

  Refer to Replacing the component