Replacing the component

Replace the relay, 2/67 (2/87 5DRS).

Activate the relay.

If the function is now OK, the cause of the fault was a defective relay (short-circuit to ground or an open-circuit in the relay coil).

Other information 

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Relays

Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the function OK? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking the control module for open-circuits