Checking the component
- Check that the rear fog lamp relay (position 2/49) is correctly installed
- Remedy as necessary
- Ignition on.
Activate the rear fog lamps by pressing ON and OFF a few times.
Other information:
- For further information about signals and other values, see Signal specification
- To access and replace the relay, see Integrated relay/fuse box cargo compartment/rear electronic module, replacing
- When the relay is installed but not activated, the voltage at the relay guide (terminal #2) should be 12 V.
Are the rear fog lamps working?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Replacing the component