Checking the component
- Check that the back-up (reversing) lamp relay (position 2/80) is correctly installed
- Remedy as necessary.
Activate the back-up (reversing) lamps by pressing ON and OFF a few times.
Other information:
- For further information about signals and other values, see Signal specification
- To access and replace the relay, see Integrated relay/fuse box cargo compartment/rear electronic module, replacing
- When the relay is installed and not activated, the voltage at the relay guide should be 12 V.
Do the back-up (reversing) lamps function?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Replacing the component