LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2007 >> S60 Base, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Central Electronic Module (CEM), Rear Electronic Module (Rem), Upper Electronics Module (UEM) - Diagnostic Trouble Codes - 13 Of 13 >> UEM-0091: Pad Lamp. Signal Too High (2005-2009) >> Signal Too High >> Replacing the Control Module >> Replacing Control Modules And Downloading Software
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replacing Control Modules And Downloading Software

CAUTION: A new control module is delivered without software. In order for the control module to function new software must be programmed into the control module after it has been replaced.

Replace the control module and download the new software. See Interior Lighting And Upper Electronic Module (UEM), Replacing .

HINT: When diagnostic trouble code (DTC) E001 is stored, communication with the control module cannot be established. This can be remedied in two ways. 

  1. Press the remote control button for local lighting.
  2. Remove fuse 11C/28 from the fusebox in the passenger compartment. Reinstall the fuse again.
Fig 1: Fuse Holder (Passenger Compartment)
GLL104037Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals