LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2007 >> S60 Base, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> Central Electronic Module (CEM), Rear Electronic Module (Rem), Upper Electronics Module (UEM) - Diagnostic Trouble Codes - 5 Of 13 >> CEM-1D06: Control Module. Configuration Fault (2002-2004) >> Configuration fault >> Programming the seat temperature (central electronic module) >> Checking the right seat
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking the right seat

Read off the programming by clicking on the VCT2000 symbol.

To change the seat temperature, mark the desired value in the scrolling list and start programming.

Programming must be carried out so that the high temperature setting is higher than the low temperature setting.

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
GLL100563Courtesy of VOLVO CARS OF NORTH AMERICA.


Read off the programming by clicking on the VCT2000 symbol.

To change the seat temperature, mark the desired value in the scrolling list and start programming.

Programming must be carried out so that the high temperature setting is higher than the low temperature setting.

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
GLL100563Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals