Checking Relay

Check that the "daytime lamp" relay is correctly installed. Also check the relay terminal, in particular terminal #2. Check for a short-circuit to supply voltage.

Remedy as necessary.

Try a new relay if no faults are found.

Other information: 

• To connect the breakout box, see Connecting the breakout box
• To replace the relay, see Central electronic module (CEM), replacing
• For further information about the fuses and relays, see the Wiring Diagram
• See Checking wiring and terminals

Fig 2: Identifying Voltmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Verification