Signal Too Low: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on
Activate the rain sensor.
HINT: When the rain sensor is activated the wiper blades perform a reference sweep to determine the cleanness/condition of the windscreen. Switching off the ignition deactivates the rain sensor. To activate the rain sensor, switch on the ignition, move the lever to position 0 and then to the intermittent wipe position.
Check that the LED in the rain sensor button comes on.
Does the LED come on?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to Information