Intermittent fault
Check the cable between the sun roof module (SRM) terminal #6A and the upper electronic module (UEM) terminal #8A. Check for an intermittent open-circuit.
Replace the cable if a fault is found.
If no fault was found, try replacing the sun roof module (SRM).
Other information:
- For further information about signals and other values, see Signal Specification
- To connect the breakout box, see Connecting the Breakout Box
- To access or replace the sun roof module (SRM) connector, see Control Module, Sun Roof, Replacing
- See Checking Wiring And Terminals .
- Continue
Refer to Information