Checking cables
Check signal cable between control module #A47 (#A47) and camshaft position (CMP) sensor connector #2 for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults . Check power cable between control module #A29 (#A29) and camshaft position (CMP) sensor connector #1 for an intermittent open-circuit according to Open-circuit, intermittent faults
Other information
- Connecting the breakout box/accessing the control module, see Connecting the breakout box .
- For component location on the B52X4 T see Location of components .
- For component location on the B6304 S see Location of components .
- For component location on the B6284 T see Location of components .
- For information about signals, see ELECTRICAL SYSTEM
- Continue
Refer to Information