Checking other diagnostic trouble codes (DTCs), engine control module (ECM)
-
NOTE:
The quick test of the fuel tank system must be activated when running this fault-tracing. When activating the quick test of the fuel tank system, diagnostic trouble code (DTC) ECM-4000, ECM-4007, ECM-4010, or ECM-4024 must not be stored. Check that none of these diagnostic trouble codes (DTCs) are stored.
- Ignition on
- Activate reading off diagnostic trouble codes (DTCs).
If any of these diagnostic trouble codes (DTCs) are stored they must be remedied and erased first.
Is diagnostic trouble code (DTC) ECM-4000, ECM-4007, ECM-4010, or ECM-4024 stored?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Checking the status