Diagnostic trouble code (DTC) information ECM-E000

Condition 

Fig 1: Identifying Engine Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

The control modules communicate with each other for exchange of information in a network via a standardized serial communication procedure - CAN (Controller Area Network). The diagnostic trouble code is stored if the engine control module (ECM) detects a malfunction in CAN communication.

Substitute Value 

• CAN communication is disabled.
• Cruise control shut off.
• Fuel cut-off that follows accelerator pedal position.
• Closing of throttle during braking.

Possible Source 

• Contact resistance in the terminals.
• Short-circuit between Control area network (CAN) wiring
• Open-circuit in the control area network (CAN) wiring

Fault symptom[s] 

• General warning lamp lit
• ETS warning lamp lit
• The cruise control does not function at all
• The engine shudders under acceleration
• The engine shudders heavily after engine braking
• Uneven idle.