Front Panel, Replacing
Removing the front panel
Release the catches. Pull off the front panel.
The front panel has double-sided adhesive tape. Ensure that any remains of the tape are removed from the black panel.
Installing the front panel
Remove the backing paper from the tape for the front panel.
Press the front panel into place.
Ordering software for the climate control module (CCM)
Order the software. See 8691285 .
Finishing
After replacing the climate control module (CCM), the following must be carried out:
- Reprogram the customer programmed data
- Carry out self-adjustment of the damper motors' end positions. This is done in VIDA vehicle communication.
Test drive the car. Check that the engine and climate control system are functioning.