Checking wiring and terminals: Notes
Check the wiring between the control module for the steering wheel angle sensor
terminal #5 (terminal (#A29) and steering wheel module terminal #4 (terminal #A4)
terminal #12 (terminal (#A36) and steering wheel module terminal #13 (terminal #A3)
terminal #13 (terminal (#A37) and steering wheel module (terminal #A11)
terminal #14 (terminal (#A38) and steering wheel module terminal #18 (terminal #A18)
check for an intermittent short-circuit to each other.
Other information:
- To connect the breakout box to the control module for the steering wheel angle sensor, see Connecting the breakout box to the steering angle sensor
- To connect the breakout box to the steering wheel module, see Connecting the breakout box
- To replace the steering wheel angle sensor, see Contact reel / steering wheel angle sensor, replacing
- For information about signals for the control module for the steering wheel angle sensor, see Signal description, Control unit for the steering wheel angle sensor (SAS)
- For information about signals to the steering wheel module, see Signal specification .
- Continue
Refer to Information