Diagnostic Trouble Code (DTC) Information
Condition
The diagnostic trouble code (DTC) is stored if the suspension module (SUM) registers that control module configuration does not correspond to car configuration. The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.
NOTE:
The test is carried out every other operating cycle.The Suspension module (SUM) defines an operating cycle as ignition on and ignition off.
Substitute Value
- Four-C (Continuously Controlled Chassis Concept) control is switched off.
HINT: For information about abbreviations, see Suspension System, Abbreviations .
Possible Source
- Configuration in the suspension module (SUM) does not correspond to car configuration
- Configuration in the suspension module (SUM) is tailored for another type of vehicle.
Fault symptom[s]
- General warning lamp lit
- Message in the display
- Four-C (Continuously Controlled Chassis Concept) does not work.