Checking the Control Module

Fig 1: Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the Suspension Module (SUM) previously installed in another car? 

• YES 

  Refer to Checking the Control Module 

• NO 

  Refer to Downloading Software 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Check that the P/N of the control module corresponds to the number in the replacement parts catalogue. If the P/N does not match the replacement parts catalogue, replace the control module. Download new software into the control module if the P/N matches the replacement parts catalogue. Select Pause. Save this as a bookmark and cancel the fault-tracing. Then go to the software manager and download the correct software. Then resume the fault-tracing.
• Select an option: 
  1. Incorrect control module P/N. OKAY:  Troubleshooting has been completed.
  2. New software downloaded. Refer to Reading Off Diagnostic Trouble Codes (DTCs) .
  NOTE: After downloading the software, the Suspension Module (SUM) must be calibrated according to VIDA vehicle communication.
  Fig 2: Control Module

  Courtesy of VOLVO CARS OF NORTH AMERICA.