Checking Cable
Check the cable between the central electronic module (CEM) terminal #1A and the back-up (reversing) lamp switch terminal #2 (3/10). Check for a short-circuit to ground.
Remedy as necessary.
Other information:
- For information about the central electronic module (CEM), see Central electronic module (CEM), replacing
- To access the back-up (reversing) lamp switch, see
- Back-up lamp switch, replacing
- For M56 and M58 2001- see Back-up lamp switch, replacing
- For M66AWD 2004-, see Back-up lamp switch, replacing .
- See Checking wiring and terminals .
Was a fault detected?
- YES
Refer to Verification
- NO