Install the control module on the ABS hydraulic modulator

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Pump Motor Connector & Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Center the control module on the ABS hydraulic modulator valves before the valves are pushed into place.

Install:

the control module. Tighten to 1.8 Nm
the connectors for the pump motor and the control module
the air cleaner (ACL) housing. See Brake Pipe Master Cylinder/Abs Unit, Replacing
the integrated relay/fusebox. See Install the integrated relay/fusebox .

Function test

See Function test .