Installing the control module
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Position the control module on the brake lines.
Center the control module with the ABS modulator valves so that the terminal pins are correctly positioned in the modulator.
Press the control module up so that the terminal pins connect.
Install:
- the screws.
Tighten to 1.8 Nm
- the connector on the control module. Lock the connector
- the integrated relay/fusebox and the connector for the ABS unit. See Installing the integrated relay/fusebox on the bracket
- the integrated relay/fusebox.
Tighten the screw. Tighten to 10 Nm
- the air cleaner (ACL) housing. See Installing the air cleaner (ACL) housing .