Reading Off Input And Output Signals
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Using this function, the values and status of the control module input and output signals can be continuously read off.
The following parameters can be read off:
- failed start attempt, Heater
- successful start attempt, Heater
- overheating incidents, Heater
- engine coolant temperature, value
- battery voltage, value
- additional heater status, value
- Extended X-supply, status
- glow plug, status
- glow plug grade, value
- water pump, status
- combustion fan, actual value
- combustion fan, calculated value
- combustion fan PWM, value
- fuel pump frequency, value
- fuel level, status
- heater operation time, value
- supply voltage to components, status.