Checking resistance

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Disconnected

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Disconnect transmission connector d.

  Check the circuit for solenoid SLU. Measure the resistance between transmission connector d terminals #d1 and #d2.

  The ohmmeter should read 5-5.6 Ω at 20° c.

  Other information: 

  • To disconnect the transmission connectors, see Connectors, transmission, disconnecting / connecting
  • For information about signals, see Signal description. Transmission control module (TCM) .
  Fig 3: Identifying 8-Pin Transmission Connector D Terminals

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying Ohmmeter

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the resistance ok? 

• Yes 

  Refer to Checking the wiring 

• No 

  Refer to Checking the wiring and component