Checking resistance

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Disconnecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Disconnect transmission connector D.

  Check solenoid SLS by measuring the resistance between terminals #D5 and #D6 on transmission connector D. The resistance should be 5-5.6 Ω at 20°C.

  Other information: 

  • To disconnect the transmission connectors, see Connectors, transmission, disconnecting / connecting
  • For information about signals, see Signal description. Transmission control module (TCM) .
  Fig 3: Connector D, Transmission -- 6-Pin Connector

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying Ohm Meter

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the resistance OK? 

• YES 

  Refer to Checking the wiring 

• NO 

  Refer to Checking the wiring and component