April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking The Status

Fig 1: Engine Start Verification

GLL101037

Courtesy of VOLVO CARS CORPORATION

Start the engine and run it to normal operating temperature.
Read off the fuel pump (FP) load.

Check whether the fault is permanent or intermittent by checking the value of the fuel pump (FP) load (signal from the engine control module (ECM) to the fuel pump (FP) control module).

Check that the signal is approximately 35 % (±5 %) with the engine idling at operating temperature.

The fault is permanent if the signal is incorrect or the engine will not start.

The fault is intermittent if the signal is correct.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Fuel Pump (FP) Control Module
Courtesy of VOLVO CARS CORPORATION

Continue
Refer to CHECKING THE COMPONENT AND WIRING