LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2007 >> V50 Base, 2.4 39 >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control Module (ECM) Diagnostic Trouble Codes - 7 Of 9 >> ECM-7140: Temperature Sensor Engine Control Module (ECM). Signal Too High / Signal Too Low (B5244S4; B5244S7; 2005-2010) >> Signal Too High / Signal Too Low >> Replacing The Component
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replacing The Component

The engine control module (ECM) has registered an internal fault.

If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can be caused by interference at start up of the engine control module (ECM) or may be a different type of fault which occurs on different occasions. The fault is evaluated depending on how it occurs. Replace the engine control module (ECM) if the fault recurs.

Replace the engine control module (ECM) in the event of a permanent fault.

Remedy as necessary.

Other information 

Fig 1: Identifying Internal Atmospheric Pressure Sensor
GLL117535Courtesy of VOLVO CARS CORPORATION