Connector, Black (12-Pin)
Before taking any readings, read Connecting the breakout box and checking the ground terminals .
Terminals E1-E12 correspond to terminals 15-26 on the breakout box.
| Terminal | Terminal on the breakout box | Signal type | Not operated | During operation | Other |
|---|---|---|---|---|---|
| #E1 | #15 | Positive power supply (M1+), motor for front-rear adjustment, forward | U = Ulow | U = Ubat | |
| #E2 | #16 | Negative supply (M1-), motor for front-rear adjustment, back | U = Ulow | U = Ubat | |
| #E3 | #17 | Signal (H1+), hall sensor 1 | U = Ubat | A pulsed signal with duty = 50% f<= 100 Hz |
One pulse / engine revolution High pulse value: Ubat Low pulse value: 7.0-9.0 V (60-70% of Ubat |
| #E4 | #18 | Signal ground (H1G), hall sensor 1 | U = Ulow | U = Ulow | |
| #E5 | #19 | Positive power supply (M3+), motor for rear height adjustment, up | U = Ulow | U = Ubat | |
| #E6 | #20 | Negative supply (M3-), motor for rear height adjustment, down | U = Ulow | U = Ubat | |
| #E7 | #21 | Signal (H3+), hall sensor 3 | U = Ubat | A pulsed signal with duty = 50% f<= 100 Hz |
One pulse / engine revolution High pulse value: Ubat Low pulse value: 7.0-9.0 V (60-70% of Ubat |
| #E8 | #22 | Signal ground (H3G), hall sensor 3 | U = Ulow | U = Ulow | |
| #E9 | #23 | Positive power supply (M4+), motor for front height adjustment, down | U = Ulow | U = Ubat | |
| #E10 | #24 | Negative supply (M4-), front height adjustment motor down | U = Ulow | U = Ubat | |
| #E11 | #25 | Signal (H4+), hall sensor 4 | U = Ubat | A pulsed signal with duty = 50% f<= 100 Hz |
One pulse / engine revolution High pulse value: Ubat Low pulse value: 7.0-9.0 V (60-70% of Ubat |
| #E12 | #26 | Signal ground (H4S), hall sensor 4 | U = Ulow | U = Ulow |