Checking wiring and components: Notes
Check heated oxygen sensor (HO2S) resistance between #1 and #2.
Check signal cable between heated oxygen sensor (HO2S) #2 and control module #A35 (#A35) and power supply between system relay #3 and heated oxygen sensor (HO2S) #1 for an open-circuit according to Open-circuit, permanent faults .
Remedy as necessary.
Other information
- Connecting the breakout box/accessing the control module, see Connecting the breakout box .
- To access/replace the heated oxygen sensor (HO2S) for 5 cylinder engines, see Replacing lambda probes .
- To access/replace the heated oxygen sensor (HO2S) for 6 cylinder engines, see Heated oxygen sensors (HO2S), replacing .
- For resistance values, see Component specifications .
- For information about signals on 5-cylinder engines, see Signal specification .
- For information about signals on 6-cylinder engines, see Signal specification .
- Continue
Refer to Verification