LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2007 >> XC70 >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Bulbs, Control Modules, Charging - Design And Function) >> Driver Information Module (2001) >> System overview >> Signals
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System overview: Signals

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

The chart below summarizes input and output signals to and from the driver information module. The signal types are divided into directly connected signals, serial communication and Control area network (CAN) communication. The illustration below displays the same information with the Volvo part numbers.

Input signals Output signals
Directly connected:  Directly connected: 
Parking brake switch, 3/47  
Malfunction indicator lamp (MIL)  
Brake fluid level sensor, 7/4  
   
Via Control Area Network (CAN):  Via Control Area Network (CAN): 
Brake control module (ABS), 4/16 Brake control module (ABS), 4/16
Central electronic module, 4/56 Central electronic module, 4/56
ECM, 4/46 Phone module, 16/60
Phone module, 16/60 SRS, 4/9
SRS, 4/9 RTI,16/45
TCM (4/28) Climate control module, 3/112
Rear electrical module, 4/58
Steering wheel module, 3/130
Fig 1: Identifying Driver Information Module Input And Output Signals
GLL106248Courtesy of VOLVO CARS OF NORTH AMERICA.