Oil pressure sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oil Pressure Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

The function of the oil pressure sensor is to warn the driver about low oil pressure via the driver information module (DIM).

The oil pressure sensor switch has a pressure sensing switch which is powered (signal) by the engine control module (ECM) and grounded in the cylinder block. The oil pressure sensor is affected by the oil pressure of the engine.

When the oil pressure exceeds a certain value, the switch in the oil pressure sensor will open. A high signal is then sent to the engine control module (ECM).

If the oil pressure is below a certain value, the switch in the oil pressure sensor will close and a high signal will be sent to the engine control module (ECM). The engine control module (ECM) then transmits a CAN signal to the driver information module (DIM) to light the indicator lamp for low oil pressure.

The oil pressure sensor is on the cylinder block.

The engine control module (ECM) cannot diagnose the oil pressure sensor.