Signal too low. Permanent fault: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect connectors, install components etc.
• Ignition on.

  Reversing light should not come on when gears 1 to 5 are selected.

Does it work? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information